Seats were cut to size from 3/4" Marine Plywood.
Edges were routed with 3/8" radius bit.
Surfaces sanded #80 grit.
Note glass cloth layed-out on seat at top of frame.
The fiberglass was wet out with epoxy.
A plastic spreader was used to force the fiberglass sheet tight against the wood substrate.
4 coats of epoxy were applied to achieve coverage of the glass cloth.
3 coats of Epoxy was applied to seat bottoms.
Excess glass was trimmed and sanded.
Additional coats of epoxy were applied to edges to build up thickness.
Click Here to return to TeslaBoys Home Page