![Photo](1.JPEG) |
Router Set-up For Corner Bead
A 3/8" Radius was routed on the top and bottom outside edges of the Gunwale. Feather Boards were used to hold the stock in place during routing.
|
Finger Joint Routing
Finger Joints were rounted into one end of each Gunwale as the stock was only about half the length of the boat.
|
![Photo](2.JPEG) |
![Photo](3.JPEG) |
Finger Joint Routing
Overview of Fixture & Router Table.
|
Finger Joints
Gunwale Ends.
|
![Photo](4.JPEG) |
![Photo](5.JPEG) |
Finger Joints Dry Fit
Gunwales assembled.
|